Your Okuma in stock!

"OKUMA MacTurn 550"

Dear prospective customer,

we have an OKUMA MacTurn 550 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control: OSP E100-L

Spindle-Hours: 3943 h

Construction: 2005

40 Station-Tool Magazine BT-50

530mm dia & 400mm dia Chucks

SMW SLU 8 – 350mm Hyd Steady Rest,
Lower Turret,

Y Axis, C Axis, B Axis, Tailstock

Auto Doors, Chip Conveyer,

Max Machining Dia: 720mm

Max Machining Length: 3000 mm

Y axis Stroke: 250mm +125mm – 125mm

B axis: 0.1 grad°

C axis (Chuck): 0.001°

Spindle Motor: 37 / 30 kw

Spindle Speeds: 35 – 3500 rpm

Live Tool Spindle: 40 – 5000 rpm

Live Tool Spindle Motor: 22 / 15 kw

Auto Tool Changer: 50 Werkzeuge / 50 Tools, BT 50 Big Plus

Tailstock: Tow Along, 150mm dia x 250mm Stroke

Chuck: Kitagawa B 21

Max Tool Weight: 20 kgs

Dimensions: L 6150mm, W3073mm, H 3105mm

Machine Weight: 31,000 Kgs

"OKUMA MA 600 HB"

Dear prospective customer,

we have an OKUMA LB-35 II MC-2000 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

DATA SHEET:

Commissioning 03/2007
Control OSP P200M
Cutting time approx. 14,000
Travels:
X-axis 1000 mm
Y-axis 900 mm
Z-axis 1000 mm
Pallet size: 630 x 630 mm (2APC)
Recording: MAS BT 50
Tool magazine: 200 – compartment BT50
Spindle speed: 10,000 rpm
B-axis index 1 • *
Hi-cut option
equipment:
Internal cooling with high pressure pump 70 bar
Chip conveyor Mayfran Consep 2000 II
Tool break button Renishaw
Renishaw probe OMP60
MOP tool load and service life monitoring

Inquiry

"OKUMA LB2000EX-II-MY-C450"

Dear prospective customer,

we have an OKUMA LB2000EX-II-MY-C450 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control: OSP P300L (OSP-VPS) Virus protection system

Spindle-Hours:

Construction: 2017

Number Axis Achsen simultan: 3
Turning Dia over Slide: 470 mm
Turning Dia over Bed: 580 mm
Spindle-Reception: JIS A2-6″
Spindle-Bore: 62 mm
Turning Dia: 300 mm

Slide:
Z-Axis: 390 mm
X-Axis: 260 mm
Y-Axis: +/- 50 mm

Turret:
Positions Turret:1 12
Driven Tools Turret 16
C-Axis

Spindle-Rotation:
From 50 R/min up to 6000 R/min

Weight: ca. 4200 kg
Measurements:Length 2600 mm; Width 2000 mm; Heigth 2250 mm

Equipment:
Collet Chuck Reception
Hainbuch TOPlus Mini
Tailstock
C-Axis
Y-Axis

"OKUMA MA 600HB 10 APC"

Dear prospective customer,

we have an OKUMA MA 600HB 10 APC in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control: OSP 200 M

Spindle-Hours: 14.898 h

Construction: 2009

Tool Holder : SK50

ATC 200 SK50

Spindel-Rotation : 12.000 RPM

37/26 kW

284 Nm

1 ° on the table

Pallets : 10 APC (630 x 630)

Linear scales in all axes X/Z

MOPTOOL

Adaptive control

Cooling : 7 step coolant through the spindle max 70 bar;

Chip Conveyer : Mayfran Concept 2000
8 extra M-codes

Programmable load station PPC

programmable tool station Auto tool measurement and tool Concept

2000 Swarf management

Renishaw probe for tools

Renishaw tool breakage detection

B-Achse 1 ° (No NC-B-Axis)

"OKUMA LT 2000 EX II MY TWINSTAR"

Dear prospective customer,

we have an OKUMA LT 2000 EX II MY TWINSTAR in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control:

Spindle-Hours:

Construction:

Performance:
Swing over Saddle: Ø 400 mm
Distanz between noses: 960 mm
Max turning dia.: Ø 210 mm
Max turning length: 130 mm

Travels:
X-Axis: XA, XB: 205 (+175 bis -30) mm
Z-Axis: ZA, ZB: 700, W: 730 mm
Y-Axis: YA: 95 (+50 / -45) YB: 95 (+45 / -50) mm
C-Axis: 360 (Inkremente 0,001)°

Spindle:
Speed: 50 – 6.000 [50 – 5.000 (nur linke Spindel / only left spindle)]
Speed ranges: 2 ( Wicklungsschaltung / motor coil swithcing ranges
Nose shape: ø 140 zyl. [JIS A2-6 (nur linke Spindel / only left spindle)]
Spindle-bore: ø 62/100 [ø 80/120 (nur linke Spindel / only left spindle)]

Turret:
Type: Multitasking V16 [V12]
No. of tools: 16 [12] (driven)
OD tool shank size: 20 / ø 32 mm
ID tool shank size:
45 – 6.000 min -1

Rapids:
X-Axis: 30 m/min
Z-Axis: 40 m/min
Y-Axis: 15 m/min
W-Axis: 32 m/min
C-Axis: 200 min -1

Motor:
Spindle L/R: 11,5/7,5 [22/15 (30/20)] (5 min/konst.) KW
Milling tool spindle: PREX 5,5/3,7 (7,5/5) (2 min/konst.) KW
X-Axis: XA: 3.5, XB: 2,8 KW
Z-Axis: ZA, ZB: 3,5 KW
Y-Axis: YsA: 3,5 KW
YsB: 3,0 KW

Coolant Pump: 0,8 x 3 KW
Size: 3.745 × 2.464 mm
Weight: 9300 Kg

EQUIPMENT

Spindle-cooling
Cooling-tank
Barring gear
compressed air
central lubrication with filling level control
Chip Conveyer
Bar feeder

"OKUMA LU-300MY-2SC-600"

Dear prospective customer,

we have an OKUMA LU-300MY-2SC-600 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control: OSP E-100L

Spindle-Hours: 14.740 h

Construction: 2004

first commissioning: 31.03.2005

A Turret NC V12 VDI40 ( All stations are driven )

B-Turret NC V8 VDI40

M-Spindle with Y-xis

C-Axis 360 °

Touch Setter for A und B Revolver

High Cut G Control

One Touch IGF Option

Tailstock manual but automatisch Schleppbar, no NC tailstock

Chip-Conveyer Mayfran and cooling station, Standard without high-pressure

turning dia: 370mm,

turning length: max 600mm

swing over bed: 400mm

Chuck Kittagawa B-210

"OKUMA GENOS L300 MY"

Dear prospective customer,

we have an OKUMA GENOS L300 MY in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control: OSP P300L-R

Spindle-Hours: 469 h !

Construction: 2014 – First Use 2016

Max Turning Length: 1000 mm

Max Swing:
over Bed: 520
over Slide: 300

Max Rotation-Speed: 3800 rpm

Equipment:
MY-Axis – V12 VDI Turret; all driven
Tailstock – Bar Feeder Interface
Parts removal
Marpos-Measurement-Sensor
Chip Conveyer & Coolant Tank

"OKUMA MULTUS B400-W"

Dear prospective customer,

we have an OKUMA MULTUS B400-W in perfect condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control: OSP P 200 L

Spindle-Hours: 2650 h

Construction: 2007

– Circumference diameter over bed slide: 710 mm
Turning diameter max .: 710 mm

-Drive length: 1500 mm
– Travel X-axis: 690 mm

– Travel Z-axis: 1545 mm
– Travel W axis: 1550 mm
– Travel Y-axis: 230 + – 115 mm
– Travel C-axis: 360º travel B-axis: 225º
– Machine dimensions W x D x H: 4.9 x 2.6 x 2.9 m
– Machine weight: 15,500 kg
– Main spindle: – Drive power (20 min / cont.): 22/15 KW
– Speed range: 38 – 3,800 min -1 –
– Spindle nose JIS: A2-8 –
– spindle bore: 80 mm –
– Bearing diameter: 120 mm
– Counterspindle: – Drive power (20 min / cont.): 22/15 KW
– Speed range: 38-3,800 min -1 –
– Spindle nose JIS: A2-8 –
– spindle bore: 80 mm –
– Bearing diameter: 120 mm
– Milling spindle (B-axis): Swivel range: 210 º
– Indexing: 1º
– Drive power (3 min / 20 min / cont.): 11 / 7.5 / 5.5 KW
– Speed range up to: 10,000 min -1
– Tool holder: HSK-A63
– Feedrates X-axes: 30 m / min
– Feed rates Z-axes: 40 m / min
– Feeds W-axes: 40 m / min
– Feed Y-axes: 26 m / min
– Feed rates C-axes: 200 min-1

EQUIPMENT & ACCESSORIES

– MAIN SPINDLE WITH POWER PUNCH: SMW SPANNING CYLINDER FOR HOLLOW VOLTAGE DRILLING IN TUBE 70 MM SCHUNK ROTA-
THW PLUS – THREE-PACK POWERED CHUCK D: 260 MM BORE 81 MM, INCLUDING DIVERSE Baking jaws
– COUNTERSPINDLE AS W-AXIS WITH POWERED TORCH: SMW CLAMPING CYLINDER FOR HOLLOW VOLTAGE DRILLING IN THE TUBE 70 MM
HAINBUCH STANDARD SPANNDORN MANDO T212 GR. 3 D: 50-80 MM EQUIPMENT & ACCESSORIES (2)
– MILLING SPINDLE WITH INCREASED SPEED 10,000 RPM, 20/14 KW, SYSTEM HSK-A63 – AUTOMATIC TOOL CHANGE (ATC) WITH 40
STATIONS, WZG.-DIAMETER MAX. 90/130 MM, LENGTH MAX. 400 MM, WEIGHT MAX 10 KG
– INTERLIT HINGE BELT CONVEYOR WITH INTEGRATED COOLANT TANK
– INTERLIT HEAVY-DUTY BELT FILTRATION SYSTEM WITH REINFORCED TANK 900 L AND SUPPLY PUMP TH90 / 690 FSI,
– IFS FILTER SYSTEM IFM2000 MECHANICAL, SUCTION POWER 1900 M3 / H – IN-PROCESS-MESSEN (RENISHAW)
– WORKPIECE REFRIGERATOR, PROGRAMMABLE, WITH FINISHED CONTAINER
– INTERFACE FOR CONNECTING A LOAD MAGAZINE SOFTWARE (1)
– 2-stage clamping pressure for power clamping device
– Tool height correction in Y-axis for turning tools
– Extension kit „M“ OSP P200L (Kit One-Touch) IGF-M-D
– Tabular representation of data with EXCEL
– Helical interpolation also for thread milling
– DNC-T3 software for online monitoring with extended data transmission
– Software multifunction tool for the use of special tools
– Automatic zero oﬀset Z axis, for main spindle and counterspindle
– Automatic zero oﬀset C axis, for main spindle and counterspindle
– Additional measuring in Y-axis
– Package Toolholders HSK-A63
– Package of turning tool holders HSK-A63
– Three-jaw chuck D: 300 mm
– CE conformity

"OKUMA MacTurn 350-W"

Dear prospective customer,

we have an OKUMA MacTurn 350-W in perfect condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control: OSP E100-L

Spindle-Hours: 3776 h

Construction: 2003

Turret and Tool Switcher: 44 Plätze

Tool-Holder: HSK63
Max Turning Dia: 350 mm
Max Turning Length: 1500 mm
Spindle-Travels: X/Y/Z/ 505 mm/190 mm/1670 mm
Main-Spindle: 3.800 min/-1
Performance: 22/15kW
Counter-Spindle: Rotation Max. 5.000 min/-1
Drive-Performance: 11/7kW

Milling-Spindle:
Rotation Speed max.: 12.000 U/min
Spindlemotor 11kW

Equipment:

Chip Conveyer

Prepared for Bar-Feeder

"OKUMA LU 300-M"

Dear prospective customer,

we have an OKUMA LU 300-M in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control: OSP E100-L

Spindle-Hours:

Construction: 2005

– A-Turret with driven Tools

– Tailstock

– Turning Length: 1000 mm

– Automatic Door

Equipment:

– Coolant with high pressure and band-filter-system

– Touchsetter

– Oil-Extraction

"MAZAK FH 10800"

Dear prospective customer,

we have an MAZAK FH 10800 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

Technical Details:

Control: MAZATROL 640M

Spindle-Hours: 15.000 h, new Spindle!

Construction: 2005

– EU/CE Maschine 2005

– 2 Pallets 1000 x 1000

– ATC 160 Tools SK50 – 15.000 RPM

– Full B-Axis 0.001 Degree

– Coolant:High Pressure Coolant trough Spindle

-Maximum Work Piece 2050 mm diameter

-Maximum Work Piece 1600mm Verfahrwege / Travels:

-X Travel 1700 mm

-y Travel 1400 mm

-z Travel 1525 mm Maschinen

-Machine size: 6100 mm x 8900mm

23 products«‹1 of 2›»

"OKUMA VTM200-1ST"

Dear prospective customer, we have an OKUMA MacTurn 550 in very good condition for you on stock! Below you will find more technical information regarding this machine. We look forward to your inquiry and remain with, ... Read More

"OKUMA MacTurn 550"

Dear prospective customer, we have an OKUMA MacTurn 550 in very good condition for you on stock! Below you will find more technical information regarding this machine. We l... Read More

"OKUMA MA 600 HB"

Dear prospective customer, we have an OKUMA LB-35 II MC-2000 in very good condition for you on stock! Below you will find more technical information regarding this machine. W... Read More

"OKUMA LB2000EX-II-MY-C450"

Dear prospective customer, we have an OKUMA LB2000EX-II-MY-C450 in very good condition for you on stock! Below you will find more technical information regarding this machine.... Read More

"OKUMA MA 600HB 10 APC"

Dear prospective customer, we have an OKUMA MA 600HB 10 APC in very good condition for you on stock! Below you will find more technical information regarding this machine. ... Read More

"OKUMA LT 2000 EX II MY TWINSTAR"

Dear prospective customer, we have an OKUMA LT 2000 EX II MY TWINSTAR in very good condition for you on stock! Below you will find more technical information regarding this machi... Read More

"OKUMA LU-300MY-2SC-600"

Dear prospective customer, we have an OKUMA LU-300MY-2SC-600 in very good condition for you on stock! Below you will find more technical information regarding this machine.... Read More

"OKUMA GENOS L300 MY"

Dear prospective customer, we have an OKUMA GENOS L300 MY in very good condition for you on stock! Below you will find more technical information regarding this machine. We... Read More

"OKUMA MULTUS B400-W"

Dear prospective customer, we have an OKUMA MULTUS B400-W in perfect condition for you on stock! Below you will find more technical information regarding this machine. We look forward to your ... Read More

"OKUMA MacTurn 350-W"

Dear prospective customer, we have an OKUMA MacTurn 350-W in perfect condition for you on stock! Below you will find more technical information regardi... Read More

"OKUMA LU 300-M"

Dear prospective customer, we have an OKUMA LU 300-M in very good condition for you on stock! Below you will find more technical information regarding this machine. We look... Read More

"MAZAK FH 10800"

Dear prospective customer, we have an MAZAK FH 10800 in very good condition for you on stock! Below you will find more technical information regarding this machine. We look... Read More